This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard zip tie. These clips offer a secure grip in the top and bottom of the shingle to ensure the pipe stays right where you want it.
These clips are not intended to be used to hold heavy props or props frames to your roof. They are tested to support the weight of a pipe and pixels and it is recommended to use at least four (4) for every ten (10) foot section of pipe.
If you have access to a 3D printer, you can download any of the designs for free by following the links below.
Base bulk pricing will be reflected in your cart and is as follows. Optional configurations are in addition to this base bulk price.
Quantity | Per Piece Price |
1-24 |
$1.20 |
25-99 | $1.10 |
100+ | $1.00 |
Dimensions:
Length: 112mm
Width: 15mm
Height: 21mm
1/2" PVC
3/4" PVC
1/2" EMT
3/4" EMT
20mm PVC
25mm PVC