STL File - 1" Spacing Pixel Mounting Trim Middle Joiner
Product Details
These are our Pixel Mounting Trim joiners for the Pixel Mounting Trim that's available from Your Pixel Store. Each joiner slides into the end of an empty trim piece with a firm grip keeping it stationary. Then additional trim pieces can be added before installing your pixels into the track and then into our joiners pieces. Each joiner piece has our distinct pixel retention hole that makes the pixel install easy and keeps the pixel in place for good!
These can be printed WITHOUT supports!
You can order your Pixel Mounting Trim from YourPixelStore.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
