This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 3/4" EMT pipe. There is a locking pin option that will help keep the clip centered on the pipe. A 3mm drill bit is recommended when using the locking pin version. The locking pin is 3mm in diameter and 1mm thick. There is also a version with a 3mm hole in the arm for the addition of a rivet to keep the SPPC in place.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
Dimensions:
Diameter: Varies
Length: Varies
Thickness: 8mm
Downloadable STL Files:
1/2" PVC
3/4" PVC
1" PVC
1/2" EMT
3/4" EMT
20mm PVC
25mm PVC