This is a vertical PVC pipe to vinyl siding pixel clip to mount your Coro Prop PVC frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 30mm and go up to 50mm to the center of the clip diameter. This is for the CLOSED clip option. There is an OPEN clip option available as well and you can access that here.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
