Stop battling with icicles that get blown around on PVC pipe. This is our secure mount for handing icicles on your gutters. With this new innovative design, you no longer need to attach your icicles to pipe and then worry about securing the pipe or clip from rotating in the pipe or flipping up into the gutter. Now you just need a zip tie and our new icicle gutter clip! There is about 35mm between the back of the Coro and the face of the gutter which should provide plenty of room for pixels and wires.
The clip is 15mm thick and has two holes for zip ties spaced 18mm apart. They have a forward pitch to them to counter the force pushing them backwards from the weight of the icicles. These will slip over the edge of your gutters and snap securely in place. They are made for gutters with a 15-17mm wide lip.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
