Our Seed Pixel Command Clips securely hold all types of seed pixels available today, including 3-wire, 4-wire, standard, and XL seeds. These versatile clips can be mounted almost anywhere using small Command adhesive strips are most definitely going to be the most versatile mount in your show this year!!
Installation Instructions:
1. Apply a small Command Strip adhesive to the back of the clip.
2. Insert the pixel wire through both slots, then twist the seed and wire down into place.
3. Position the first clip with a seed where you want to start.
4. Pull the wire tight to the next mounting location.
5. Attach another clip with adhesive, insert the next seed pixel, and place it while maintaining tension on the wire. Press firmly for a few moments to secure it.
6. Repeat the process to create outlines, matrices, or any custom shape you need.
That’s it! A simple and effective way to mount seed pixels with precision.
You can purchase the refill adhesive strips by following either of the links below:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
