1/2" EMT STL Files

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom of...

This is a 3D printed pipe clip to hold 1/2" EMT pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for...

This is a gutter clip designed to hold 1/2" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping feature...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You Buy:This option is for those of you that are not certain...

This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 1/2" EMT pipe. There is a locking pin option that will help keep the clip centered on the pipe. A 3mm drill bit is...

This is a 3D printed gutter clip designed to hold 1/2" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three different sizes are included in the zip file.Try...

This is our 1/2" EMT to 1/2" EMT perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side spacing that...

This is our 1/2" EMT to 1/2" PVC perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side...

This is an EMT to PVC bushing. This bushing was designed to work with the Lasco Schedule 40 fittings. Please note that the 1/2" bushing was designed to fit into a 1/2" Schedule 40 fitting and accept a 1/2" EMT pipe.Try Before You Buy:This option is for...

This is our 1/2" PVC to 1/2" EMT perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...