SFL Designs

Categories

Disclaimer

DISCLAIMER All the information on this website - sfl-designs.com - is published in good faith and for general information purpose only. SFL Designs, LLC does not make any warranties about the...

About Us

It started with our own light show SFL Designs is what happens when a Christmas light hobby gets out of hand, in the best way. We run our own animated display (Sisk Family Light Shows) here in Saint...

Design for the Printer You Own, Not the Render You Love

A beautiful Fusion 360 model can still be a terrible print. The render does not care about gravity. The nozzle does. Design for manufacturing means the manufacturing method gets a vote while you are m

Wet Filament Has a Soundtrack

Your printer is not supposed to provide its own sound effects. If a print sounds like a tiny bowl of breakfast cereal (snap, crackle, pop coming right from the nozzle), you are not hearing a settings

Stop Drawing Blue Noodles: Sketch Constraints in Fusion 360

If your Fusion 360 sketch wiggles when you drag it, Fusion is not broken. Your sketch is still negotiating the terms. Those blue lines are basically saying, “I know I am a rectangle, but nobody told m

Tell xLights Where the Brain Lives: Controller Setup and Uploading Output

This morning you picked pixels: shapes, spacings, and numbers for every prop. This afternoon those numbers meet the brain. Because here is the beginner trap nobody warns you about. You can build a per

+ wishlist

Choose Options

SFL Designs
STL File - YPS GlideGuide

YPS GlideGuide – The Mega Tree Game‑Changer Stop fighting your mega tree. Start gliding it. The YPS GlideGuide by SFL Designs is built to eliminate binding, wobble, and “hope it doesn’t catch”...

$4.00
+ wishlist

Choose Options

Langdon's Designs
STL File - Coyote Tee Connector 3/4" PVC

Our Coyote Tee Connectors are the perfect addition to your DIY display. This downloadable STL file includes the Coyote Tee Connector for a 3/4" PVC inserted pipe in all four through pipe...

$4.00
+ wishlist

Choose Options

Langdon's Designs
STL File - Coyote Tee Connector 3/4" EMT

Our Coyote Tee Connectors are the perfect addition to your DIY display. This downloadable STL file includes the Coyote Tee Connector for a 3/4" EMT inserted pipe in all four through pipe...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 20mm PVC Pipe Standoff

This is our 20mm PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - GlideGuide Roller Wheels

These are our GlideGuide Roller Wheels that were designed to work with the GlideGuide mega tree bearing blocks. These should be printed with a hardened TPU, like TPU 95 or higher. There are two...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Pipe to Coro Front Brace

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Seed Pixel Poppers

These are our Seed Pixel Poppers intended to be used with 3 & 4 wire seed pixels from Your Pixel Store and all others including the XL seeds from various vendors. These poppers give your seed pixels...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Icicle Soffit Trim Clip

Stop battling with icicles that get blown around on PVC pipe. This is our soffit trim clip for handing icicles from. The clip is 14mm thick and has two holes for zip ties spaced 18mm apart. They have...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Soffit Trim Cable Hook

This is a cable hook that attaches to standard soffit trim. Please measure the thickness of your trim where you plan to attach this and order the correct version. These are available for 1.2mm and 2...

$4.00
+ wishlist

Choose Options

Langdon's Designs
STL File - Coyote Tee Connector 1/2" EMT

Our Coyote Tee Connectors are the perfect addition to your DIY display. This downloadable STL file includes the Coyote Tee Connector for a 1/2" EMT inserted pipe in all four through pipe...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 1" PVC Pipe Standoff

This is our 1" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 25mm PVC Pipe Standoff

This is our 25mm PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

$4.00
+ wishlist

Choose Options

Langdon's Designs
STL File - Coyote Tee Connector 1/2" PVC

Our Coyote Tee Connectors are the perfect addition to your DIY display. This downloadable STL file includes the Coyote Tee Connector for a 1/2" PVC inserted pipe in all four through pipe...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Vinyl Siding Wire Cover

This is a wire cover that can be clipped into vinyl siding to capture and/or conceal cables that run to lights, props or other devices. This is available in 1" increments starting at 1" and going as...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - PermaTrack Middle Joiner

This is a middle joiner used with the PermaTrack Pixel Mounting system. Each joining piece gives your PermaTrack mounting system a professional finish. These are the STL files that you can use to...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Seed Pixel Tension Clips

These Mini Tree Seed Pixel Clips are anything but mini. They work great with mini ball bungees found on Amazon to keep adequate tension on your seed pixel strings wherever they are used. Special zip...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 3/4" EMT Pipe Standoff

This is our 3/4" EMT pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 20mm PVC Roof Peak Bracket

This is the STL files to print the roof peak brackets designed to hold 20mm schedule 40 PVC pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 25mm PVC Roof Peak Bracket

This is the STL files to print the roof peak brackets designed to hold 25mm schedule 40 PVC pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Pipe to Coro Front Brace Slimline

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 1/2" PVC Pipe Standoff

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is 4mm in diameter with a 4mm countersunk hole. The clip...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Bullet Track Middle Joiner

This is an middle joiner used with the Bullet Track Mounting system. Each joining piece gives your Bullet Track mounting system a professional finish. These end caps were designed to work with the...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 20mm PVC Soffit Trim Clip

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 1/2" EMT Pipe Standoff

This is our 1/2" EMT pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Bullet Pixel Square Mounting Base

This is a square pixel mount for 12mm bullet pixels. The mounting holes are 4mm in diameter and the thickness of the base is 8mm. The base is 30mm x 30mm square and a total of 15mm tall. Try Before...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Bullet Pixel Tree Clip

This is a BPTC (Bullet Pixel Tree Clip) that will securely hold a 12mm Bullet pixel parallel to a tree base or branch for Christmas Lights. There are three sizes available that have a different...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - 3/4" PVC Pipe Standoff

This is our 3/4" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - EFL Pixel Strip Pushing Tool

The pixel pusher is a EFL version that is very ergonomic and also includes a reverse pixel feature to help push pixels back out of coro. Try Before You Buy: This option is for those of you that are...

$4.00
+ wishlist

Choose Options

Langdon's Designs
STL File - T-Post to Coro Bracket

This is our T‑Post Coro Mount engineered for builders who need a rigid, reliable frame for their coro props. This mount c

$4.00
+ wishlist

Choose Options

SFL Designs
STL File - Seed Pixel MatrixMate

MatrixMate — The Clean‑Build Upgrade Your Seed Pixel Matrix Deserves Meet MatrixMate, our new connectable wire‑aligning guide built specifically for seed pixel matrices. If you’re tired of fighting...

$4.00

715 results for 'stl files'

Advanced Search

Search By Price

Search By Setting

Categories

Top Trending

Product results (0)