Props

The Inline Pipe Coupler is designed to create a clean, rigid, straight‑through connection between two pipes. Whether you’re building frames for coro props, structural supports, or custom display elements, this coupler keeps your pipes perfectly...

A magnetic coro mount designed for fast, tool‑free installation of coro props on metal surfaces. This mount uses a countersunk neodymium magnet to create a strong, reliable attachment point while allowing you to position or remove props instantly during...

This is our perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. These are printed in UV resistant PETG material and if you are concerned with heat in you area, we do offer these in ASA for an additional cost. I...

This is our pipe standoff. This is available for 1/2" & 3/4" PVC and EMT pipe and in lengths of 1" up to 3" in 1/2" increments. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length. If you...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.   Base bulk pricing will be reflected in your...

This is a pipe to vinyl siding pixel bracket to mount PVC or EMT to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the center of the clip...

These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our mounts have a special knurled texture on the bottom that...

Our Seed Pixel Flushy Pops are purpose‑built for 3 & 4 wire seed pixels from Your Pixel Store, along with seeds from a variety of other vendors. They’re designed to position the seed right up against the face of a standard 10mm prop, giving you...

These are our Seed Pixel Poppers intended to be used with 3 & 4 wire seed pixels from Your Pixel Store and all others including the XL seeds from various vendors. These poppers give your seed pixels that classic 12mm look without all of the weight...

These are our Ultimate Arch Bases. These arch bases are sold as a set. They DO NOT come with the required nuts and bolts (PVC/PEX and EMT pipe not included) but there are links below to order the hardware. Each base has a sturdy base that can interlock...

This is a U-Post to Coro mount to help keep your coro secure in your yard or wherever you can use a U-Post. These are available in lengths of 10mm increments starting at 40mm and go up to 100mm to the center of the clip diameter.   This is the...