For Coro Decorations

This is a flush mount pipe clip. This is available for 1/2" & 3/4" PVC and EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in length based on the pipe it is made...

A magnetic coro mount designed for fast, tool‑free installation of coro props on metal surfaces. This mount uses a countersunk neodymium magnet to create a strong, reliable attachment point while allowing you to position or remove props instantly during...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.   Base bulk pricing will be reflected in your...

These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our mounts have a special knurled texture on the bottom that...

This is a vinyl siding pixel prop hanger to hang coro props to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. The two holes on...

This is a vinyl siding pixel prop spacer that is used with the hangers to space the coro props away from your vinyl siding. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. These are available in lengths...