For Coro Decorations

This is a flush mount pipe clip. This is available for 1/2" & 3/4" PVC and EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in length based on the pipe it is made...

This is a magnetic mount for Coro props. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the base of the clip, not including the thickness of the magnet. The round base thickness is not included in that dimension...

This is a PVC pipe clip to mount to your Coro prop for creating a frame for your Coro prop. Each group of clips can reliably support up to 35lbs of weight as shown in the image. When using EMT, they can hold even more. These are available in lengths of...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.   Base bulk pricing will be reflected in your...

  This is a vinyl siding pixel prop hanger to hang coro props to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. The two...

  This is a vinyl siding pixel prop spacer that is used with the hangers to space the coro props away from your vinyl siding. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. These are available in...