-
Choose Options SFL Designs
STL File - 1" PEX Flush Mount Icicle Pipe ClipNo more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...$4.00 -
Choose Options SFL Designs
STL File - 1" PVC Flush Mount Icicle Pipe ClipNo more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...$4.00 -
Choose Options SFL Designs
STL File - 1" PVC Flush Mount Pipe ClipThis is a flush mount pipe clip. This is available for 1" PVC pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...$4.00 -
Choose Options SFL Designs
STL FILE - 1/2" EMT Extended Shutter Mount ClipThis is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount. Try Before You...$4.00 -
Choose Options SFL Designs
STL File - 1/2" EMT Flush Mount Icicle Pipe ClipNo more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...$4.00 -
Choose Options SFL Designs
STL File - 1/2" EMT Flush Mount Pipe ClipThis is a flush mount pipe clip. This is available for 1/2" EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...$4.00 -
Choose Options SFL Designs
STL FILE - 1/2" EMT Flush Shutter Mount ClipThis is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount. Try Before You...$4.00 -
Choose Options SFL Designs
STL FILE - 1/2" EMT Magnetic Base Mount ClipThis is a pipe clip that mounts to a surface with a 1.25" magnet that is to be screwed into the base. These are available in lengths of 1", 1.5" 2", 2.5" & 3". The length is from the center of the...$4.00 -
Choose Options SFL Designs
STL File - 1/2" EMT Perpendicular Shingle ClipThis is a shingle clip designed to hold 1/2" EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard...$4.00 -
Choose Options SFL Designs
STL File - 1/2" EMT Pipe (Closed) to Vinyl Siding BracketThis is a EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments...$4.00 -
Choose Options SFL Designs
STL File - 1/2" EMT Pipe (Open) to Vinyl Siding BracketThis is a EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments...$4.00 -
Choose Options SFL Designs
STL File - 1/2" EMT Pipe StandoffThis is our 1/2" EMT pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...$4.00
