Build Props, Panels & Matrices

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side...

  No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection...

These are our P5 Panel joiners for indoor panels. Be sure you select the correct version as the mounting holes are not the same. One easy way to tell is the number of bolt holes on each panel. Typically indoor panels have 6 or eight, and outdoor panels...

The Inline Pipe Coupler is designed to create a clean, rigid, straight‑through connection between two pipes. Whether you’re building frames for coro props, structural supports, or custom display elements, this coupler keeps your pipes perfectly...

A magnetic coro mount designed for fast, tool‑free installation of coro props on metal surfaces. This mount uses a countersunk neodymium magnet to create a strong, reliable attachment point while allowing you to position or remove props instantly during...

  These are our P5 Panel joiners for outdoor panels. Be sure you select the correct version as the mounting holes are not the same. One easy way to tell is the number of bolt holes on each panel. Typically indoor panels have 6 or eight, and outdoor...

This is our perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. These are printed in UV resistant PETG material and if you are concerned with heat in you area, we do offer these in ASA for an additional cost. I...

This is our pipe standoff. This is available for 1/2" & 3/4" PVC and EMT pipe and in lengths of 1" up to 3" in 1/2" increments. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length. If you...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. These clips provide a dependable connection point for building structural frames, stabilizing large props, and reinforcing display...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.   Base bulk pricing will be reflected in your...

This is a pipe to vinyl siding pixel bracket to mount PVC or EMT to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the center of the clip...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to...