Mount Individual Lights

This is a square pixel mount for 12mm bullet pixels. The mounting holes are 4mm in diameter and the thickness of the base is 8mm. The base is 30mm x 30mm square and a total of 15mm tall. If you have access to a 3D printer, you can download any of the...

  This is a BPTC (Bullet Pixel Tree Clip) that will securely hold a 12mm Bullet pixel parallel to a tree base or branch for Christmas Lights. There are three sizes available that have a different radius to help hug the portion of the tree you are...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe and 1/4" round bar. There is also a locking pin...

This is a PBC (Pixa Bulb Clip) that will securely hold a Pixa Bulb C7 or C9 pixel that can then be mounted to 1/2" or 3/4" PVC or EMT pipe. There is also a locking pin option that will help keep the clip centered on the pipe. A 3mm drill bit is...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC and 1/2" &...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe. There is a locking pin option that will...

This is a 3D printed gutter clip designed to securely hold a Pixa Bulb C7 or C9 pixel. These clips will latch over the edge of the gutter and hold the Pixa Bulb securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation...

This is a 3D printed gutter clip designed to securely hold a Pixa Bulb C7 or C9 pixel. These clips will latch over the edge of the gutter and hold the Pixa Bulb securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation...

This is a pixel spacer block that will align a 12mm Bullet pixel parallel to a PVC or EMT pipe and then can be zip tied to the pipe for Christmas Lights. This was designed for 1/2", 3/4" schedule 40 PVC and EMT pipe. There are two versions available. One...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm bullet pixel that can be mounted to a either 3/16" and 1/4" round bar, 1/2" & 3/4" schedule 40 PVC & EMT pipe. There is also a locking pin option that will help keep the clip centered...

Our Seed Pixel Command Clips securely hold all types of seed pixels available today, including 3-wire, 4-wire, standard, and XL seeds. These versatile clips can be mounted almost anywhere using small Command adhesive strips are most definitely going to...

Our Seed Pixel Flushy Pops are purpose‑built for 3 & 4 wire seed pixels from Your Pixel Store, along with seeds from a variety of other vendors. They’re designed to position the seed right up against the face of a standard 10mm prop, giving you...