Props

This is a magnetic mount for Coro props. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the base of the clip, not including the thickness of the magnet. The round base thickness is not included in that dimension...

This is our perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. These are printed in UV resistant PETG material and if you are concerned with heat in you area, we do offer these in ASA for an additional cost. I...

This is our pipe standoff. This is available for 1/2" & 3/4" PVC and EMT pipe and in lengths of 1" up to 3" in 1/2" increments. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length. If you...

This is a PVC pipe clip to mount to your Coro prop for creating a frame for your Coro prop. Each group of clips can reliably support up to 35lbs of weight as shown in the image. When using EMT, they can hold even more. These are available in lengths of...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.   Base bulk pricing will be reflected in your...

This is a pipe to vinyl siding pixel bracket to mount PVC or EMT to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the center of the clip...

These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our mounts have a special knurled texture on the bottom that...

Our Seed Pixel Flushy Pops are purpose‑built for 3 & 4 wire seed pixels from Your Pixel Store, along with seeds from a variety of other vendors. They’re designed to position the seed right up against the face of a standard 10mm prop, giving you...

These are our Seed Pixel Poppers intended to be used with 3 & 4 wire seed pixels from Your Pixel Store and all others including the XL seeds from various vendors. These poppers give your seed pixels that classic 12mm look without all of the weight...

These are our Ultimate Arch Bases. These arch bases are sold as a set. They DO NOT come with the required nuts and bolts (PVC/PEX and EMT pipe not included) but there are links below to order the hardware. Each base has a sturdy base that can interlock...

This is a vinyl siding pixel prop hanger to hang coro props to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. The two holes on...

This is a vinyl siding pixel prop spacer that is used with the hangers to space the coro props away from your vinyl siding. These were designed to be somewhat universal and only require the use of a zip tie for each hanger. These are available in lengths...