These are our Seed Pixel Poppers intended to be used with 3 & 4 wire seed pixels from Your Pixel Store and all others including the XL seeds from various vendors. These poppers give your seed pixels that classic 12mm look without all of the weight compared to traditional pixels. These are designed to pop into standard 10mm coro with 12mm holes and the mini version is just a shorter version of the standard popper. We also have an extended version that is used to go through two pieces of coro. Lastly, there is a pixel strip version also included. The recommended printing instructions are included in the zip file. Please read those suggestions on how to print the poppers properly.
Our two piece design utilizes a bulb that is a textured, transparent material for the first few millimeters while the shaft and base are solid black. This helps direct the led light to the top of the bulb. The tip of the bulb is textured to help distribute the light for the brightest and widest viewing angle. The base cap is used to secure the seed into the bulb and is easy to snap into place.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG or ABS
- At least 25% infill (grid or honeycomb for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Height: 20mm
Diameter: 14mm (12mm insertion hole)
Downloadable STL Files: