3/4" PEX STL Files

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection. This STL...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second...

These are our seed pixel pipe clips. They snap right onto 3/4" PEX pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed pixels on the...

These are our seed pixel pipe matrix clips. They snap onto 3/4" PEX pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips are used...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 3/4" PEX pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom of...

This is a gutter clip designed to hold 3/4" PEX pipe. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping feature...