This is a gutter clip designed to hold 1/2" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping feature on the front to help secure them to the gutter. There is a screw hole in the pipe arms to secure your pipe to the clip to keep the pipe from rolling in the clip.
Several combinations are available for these clips and the locations of the pipe can be referenced back to this image.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
