These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our mounts have a special knurled texture on the bottom that helps keep them in place on your roof. Each mount comes with two feet that also have this special texture to them.
We also incorporated angle marks on the side of our mount to help you set each prop to the same angle for consistency.
A 1/4"-20 bolt can be used on the angled pipe at a recommended 2" length. We also recommend using a nylon lock nut to for the 1/4"-20 bolt. When mounting your prop to the angled pipe, our Universal Pipe to Coro Bracket would work the best.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
