This is a base/wall mount for a Kulp K32A-B. This mount was designed to hold the K32A-B with the Beaglebone Black, but can be used to hold just the K32A-B as well. The mounting posts were designed to use a McMaster Carr Thread-Forming screw number 96817A421 and will come with eight (8) screws when you order this from us. The hole provisions to mount the bracket to the wall are 4mm in diameter.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
PETG or ABS
At least 25% infill (grid or honeycomb for strength)
We used a 0.4mm nozzle with a 0.2mm layer height
At least 1mm wall thickness
4 walls
6 Top and Bottom layers
These can be printed without supports
Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
