EMT Pipe Options

This is a PPC (Pixel Pipe Clip) spacer tool that will help you accurately space out PPCs or PBCs as they are mounted on PVC or EMT pipe. This was designed for 1/2", 3/4", 20mm and 25mm schedule 40 PVC pipe as well as 1/2" and 3/4" EMT pipe. For the...

This is a 3D printed roof peak bracket designed to hold 1/2", 3/4" schedule 40 PVC or EMT. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in heavy winds!If you have access to a 3D printer, you can...

Not sure what clips you'll need for your lighting display? Give this sample pack a go to help you sort out what you may need. Each sample pack includes some of our most popular products. Just select the pipe style and size you want to try out, and we'll...

Not sure what clips you'll need for your lighting display? Give this sample pack a go to help you sort out what you may need. Each sample pack includes some of our most popular products. Just select the pipe style and size you want to try out, and we'll...

Not sure what clips you'll need for your lighting display? Give this sample pack a go to help you sort out what you may need. Each sample pack includes some of our most popular products. Just select the pipe style and size you want to try out, and we'll...

These are our seed pixel pipe clips. They snap right onto PVC, EMT or PEX pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed...

These are our seed pixel pipe matrix clips. They snap onto PVC or EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips are used...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto PVC or EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom...

This is a 3D printed Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount.If you have access to a 3D printer, you can download any of the...

This is a 3D printed pipe clip to hold 1/2", 3/4" schedule 40 PVC or EMTpipe that would then mount to a flat surface with two screws.If you have access to a 3D printer, you can download any of the designs for free by following the links below.Base bulk...

This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC, PEX or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! These new clips have a built in...

This is a 3D printed gutter clip designed to hold 1/2", 3/4" schedule 40 PVC, PEX or EMT. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! These new clips have a built in...