General

These are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. These are sold in different kits and in several different colors. They are printed in PETG and all as a single piece, so there is no worry of the...

These are plugs for Xconnect/HC, Ray Wu and Daniel Zhang pigtails. These are used to plug the pigtails connection to prevent moisture intrusion when there is no pigtail attached. Use these to protect the open pigtail connections in the off season to...

  These are multi-colored Pigtail Wire Label Clips that help mark your pigtails from your controller or props. These are sold in different kits and in several different colors. They are printed in PETG and all as a single piece, so there is no worry...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.Base bulk pricing will be reflected in your cart...

  This is a 3D printed gutter clip designed to securely hold a Pixa Bulb C7 or C9 pixel. These clips will latch over the edge of the gutter and hold the Pixa Bulb securely to the gutter, even in heavy winds! These new clips have a built in...

  This is a 3D printed gutter clip designed to securely hold a Pixa Bulb C7 or C9 pixel. These clips will latch over the edge of the gutter and hold the Pixa Bulb securely to the gutter, even in heavy winds! These new clips have a built in...

These are our Pixel Mounting Trim joiners for the Pixel Mounting Trim that's available from Your Pixel Store. Each joiner slides into the end of an empty trim piece with a firm grip keeping it stationary. Then additional trim pieces can be added before...

This is a J-Channel mount for the Pixel Mounting Trim that's available from Your Pixel Store. Pair this with our Pixel Mounting Trim joiners to create window, door and home feature outlines.You can order your Pixel Mounting Trim from YourPixelStore...

Pixel Paradise Snow Leopard GlideGuide – The Mega Tree Game‑Changer Stop fighting your mega tree. Start gliding it. The Pixel Paradise Snow Leopard GlideGuide by SFL Designs, was inspired by the original Sliding Tree Topper Bearing Block from...

This pixel strip jig was designed to work with the standard 1mm thick pixel strip as well as the heavy duty 1.5mm pixel strip. There are four mounting holes to secure the jig to a table top. The holes are 4mm in diameter and work with standard wood...

This is a surface mounting bracket for a single, dual, triple or quad power supply. These are sold as a set, and will be printed with PETG. These new brackets were designed for the MEAN WELL LRS-350, MEAN WELL LRS-600, and most generic power supplies...

This is an angled bracket used with the Puck Track Mounting system. Each bracket gives your Puck Track mounting system a professional finish. These components are printed with PETG which is UV resistant and is intended to last for many years to come...