This is a 3D printed mega tree strip stabilizer. This is a great addition to your mega tree to help keep the strips all facing outward. This clever design allows the user to squeeze the back two tabs that allow the stabilizer to open up and clamp around the pixel strip. Now a zip-tie can be applied between the strip and the cable used to stabilize the strips. Standard air craft cable up to 3/16" can be guided through the hole in along the rear of the stabilizer. The cable can also be secured using a 1/4" diameter, thread forming screw.
These are designed to work with different thicknesses of mega tree strip and down to 1" pixel spacing.
This is a creation by Langdon Designs!
If you have access to a 3D printer, you can download any of the designs for free by following the links below.
Base bulk pricing will be reflected in your cart and is as follows. Optional configurations are in addition to this base bulk price.
| Quantity | Per Piece Price |
| 1-24 | $0.85 |
| 25-49 | $0.80 |
| 50+ | $0.75 |
Dimensions:
Length:38mm
Width: 40mm
Thickness: 12mm
Downloadable STL Files: