This is a 3D printed Pixel Pipe Stake. This was designed to hold the Boscoyo and HolidayCoro pixel strips. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is best to insert a small piece of PVC pipe into the clip and then use a rubber mallet to insert them into the ground at your desired depth. If you want to be even more cautious, you can use a small 2x4 on top of the PVC pipe inserted into the clip to help distribute the load from the rubber mallet.
*Please
note that these are not designed for the Gilbert Engineering pixels
strips as they are a bit wider than the Boscoyo or Holiday Coro pixel strips.
If you have access to a 3D printer, you can download any of the designs for free by following the links below.
Base bulk pricing will be reflected in your cart and is as follows. Optional configurations are in addition to this base bulk price.
| Quantity | Per Piece Price |
| 1-9 | $2 |
| 10-19 | $1.85 |
| 20-29 | $1.70 |
| 30-49 | $1.55 |
| 50+ | $1.40 |
Dimensions:
Diameter: Varies
Length: Varies
Thickness: 15mm
Downloadable STL Files:
- 8" Pixel Pipe Stake With Zip Tie Channel
- 10" Pixel Pipe Stake With Zip Tie Channel
- 12" Pixel Pipe Stake With Zip Tie Channel
Pixel Strip (Boscoyo and HolidayCoro 1.5mm thick) (COMING SOON)
- 8" Pixel Pipe Stake
- 10" Pixel Pipe Stake
- 12" Pixel Pipe Stake
- 8" Pixel Pipe Stake With Zip Tie Channel
- 10" Pixel Pipe Stake With Zip Tie Channel
- 12" Pixel Pipe Stake With Zip Tie Channel