These are multi-colored Pigtail Wire Label Clips that help mark your pigtails from your controller or props. These can be printed in PETG and all as a single piece, so there is no worry of the color fading or the numbers coming apart from the clip. The port numbers are clearly visible which makes identifying all of your cables a breeze. These snap on to the wire of the pigtail and have a channel for a zip tie to wrap around the wire so they won't fall off during setup or tear down of your display. They are compatible on all different pigtail wires that are 6.25mm or smaller in diameter.
These Pigtail Wire Label Clips are a creation of Pat Gianotto!
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG or ABS
- At least 25% infill (honeycomb for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports, but we have had the best appearance results when using supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Varies
Downloadable STL Files:
6.25mm OD Pigtail Wire Labeling Clips