This is a 3D printed mega tree strip stabilizer. This is a great addition to your mega tree to help keep the strips all facing outward. This clever design allows the user to squeeze the back two tabs that allow the stabilizer to open up and clamp around the pixel strip. Now a zip-tie can be applied between the strip and the cable used to stabilize the strips. Standard air craft cable up to 3/16" can be guided through the hole in along the rear of the stabilizer. The cable can also be secured using a 1/4" diameter, thread forming screw.
These are designed to work with different thicknesses of mega tree strip and down to 1" pixel spacing.
This is a creation by Langdon Designs!
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG or ABS
- At least 25% infill (honeycomb for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Length:38mm
Width: 40mm
Thickness: 12mm
Downloadable STL Files: