25mm PVC STL Files

This is our 25mm PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

This is the STL files to print the roof peak brackets designed to hold 25mm schedule 40 PVC pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in heavy winds!Try Before You Buy:This option is for...

These are our seed pixel pipe clips. They snap right onto 25mm PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed pixels on the...

These are our seed pixel pipe matrix clips. They snap onto 25mm schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 25mm PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom of...

This is a 3D printed pipe clip to hold 25mm PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for...

This is a gutter clip designed to hold 25mm schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in anti-rotation bar on the rear and a gripping...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You Buy:This option is for those of you that are not certain...

This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 25mm schedule 40 PVC pipe. There is a locking pin option that will help keep the clip centered on the pipe. A 3mm...

This is a 3D printed gutter clip designed to hold 25mm schedule 40 PVC pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three different sizes are included in the zip...