PVC Pipe Options

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 1/2", 3/4" & 1" schedule 40 PVC pipe, 1/2" & 3/4" EMT pipe. There is a locking pin option that will help...

This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard zip tie. These clips offer a...

These are EMT to PVC and PVC to PVC bushing. This bushing was designed to work with the Lasco Schedule 40 fittings. Please note that the 1/2" bushing was designed to fit into a 1/2" Schedule 40 fitting and accept a 1/2" EMT pipe. The 3/4" bushing was...

This is our pipe standoff. This is available for 1/2" & 3/4" PVC and EMT pipe and in lengths of 1" up to 3" in 1/2" increments. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.If you have...

This is a PVC pipe clip to mount to your Coro prop for creating a frame for your Coro prop. Each group of clips can reliably support up to 35lbs of weight as shown in the image. When using EMT, they can hold even more. These are available in lengths of...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe to be used as a standoff. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The pixel wires...

This is a pipe to vinyl siding pixel bracket to mount PVC or EMT to your vinyl siding. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments starting at 50mm and go up to 100mm to the center of the clip...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC and EMT. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is best to insert a small piece of PVC pipe into the clip and then...

This is a pixel spacer block that will align a 12mm Bullet pixel parallel to a PVC or EMT pipe and then can be zip tied to the pipe for Christmas Lights. This was designed for 1/2", 3/4" schedule 40 PVC and EMT pipe. There are two versions available...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm bullet pixel that can be mounted to a either 3/16" and 1/4" round bar, 1/2" & 3/4" schedule 40 PVC & EMT pipe. There is also a locking pin option that will help keep the clip centered on...

This is a PPC (Pixel Pipe Clip) spacer tool that will help you accurately space out PPCs or PBCs as they are mounted on PVC or EMT pipe. This was designed for 1/2", 3/4", 20mm and 25mm schedule 40 PVC pipe as well as 1/2" and 3/4" EMT pipe. For the...

  This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper...