General Design STL Files

This is a surface mounting bracket for a single power supply. These new brackets were designed for most generic power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting options. All...

This is a surface mounting bracket for a single power supply. These new brackets were designed for the MEAN WELL LRS-350 power supplies. These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting options...

This is a surface mounting bracket for a single power supply. These new brackets were designed for the MEAN WELL LRS-600 power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting...

This is a vertical mounting bracket for a single power supply. These new brackets were designed for the MEAN WELL LRS-350 power supplies only. Our vertical power supply mounts are perfect for your P5/P10 panel builds which allow the power supply to be...

This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...

This is a cable hook that attaches to standard soffit trim. Please measure the thickness of your trim where you plan to attach this and order the correct version. These are available for 1.2mm and 2.3mm thicknesses. The wire channel gap has a 10.5mm...

This is a surface mounting bracket for a triple power supply. These new brackets were designed for most generic power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting options. All of...

This is a surface mounting bracket for a triple power supply. These new brackets were designed for the MEAN WELL LRS-350 power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting...

This is a surface mounting bracket for a triple power supply. These new brackets were designed for the MEAN WELL LRS-600 power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting...

This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...

This is a U-Post to Coro mount to help keep your coro secure in your yard or wherever you can use a U-Post. These are available in lengths of 10mm increments starting at 40mm and go up to 100mm to the center of the clip diameter.   This is the...

This is a wire cover that can be clipped into vinyl siding to capture and/or conceal cables that run to lights, props or other devices. This is available in 1" increments starting at 1" and going as long as 6". The wire channel gap has a 3/8" opening and...