-
Choose Options STL File - Single Vertical Power Supply MountThis is a vertical mounting bracket for a single power supply. These new brackets were designed for the MEAN WELL LRS-350-5 / LRS-350-12 / LRS-350-24 power supplies only. Our vertical power supply mounts are perfect for your P5/P10 panel builds which...$4.00 -
Choose Options STL File - Single Zip Tie Coro Backer PlateThis is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...$4.00 -
Choose Options STL FILES
STL File - Soffit Trim Cable HookThis is a cable hook that attaches to standard soffit trim. Please measure the thickness of your trim where you plan to attach this and order the correct version. These are available for 1.2mm and 2.3mm thicknesses. The wire channel gap has a 10.5mm...$4.00 -
Choose Options STL FILES
STL File - Triple Generic Power Supply Mounting BracketThis is a surface mounting bracket for a triple power supply. These new brackets were designed for most generic power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting options. All of...$4.00 -
Choose Options STL FILES
STL File - Triple LRS-350 Power Supply Mounting BracketThis is a surface mounting bracket for a triple power supply. These new brackets were designed for the MEAN WELL LRS-350-5 / LRS-350-12 / LRS-350-24 power supplies. These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes...$4.00 -
Choose Options STL FILES
STL File - Triple LRS-600 Power Supply Mounting BracketThis is a surface mounting bracket for a triple power supply. These new brackets were designed for the MEAN WELL LRS-600-12/ LRS-600-24 power supplies. These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying...$4.00 -
Choose Options STL File - Triple Zip Tie Coro Backer PlateThis is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...$4.00 -
Choose Options Langdon's Designs
STL File - U-Post to Coro MountThis is a U-Post to Coro mount to help keep your coro secure in your yard or wherever you can use a U-Post. These are available in lengths of 10mm increments starting at 40mm and go up to 100mm to the center of the clip diameter. This is the...$4.00 -
Choose Options STL FILES
STL File - Vinyl Siding Wire CoverThis is a wire cover that can be clipped into vinyl siding to capture and/or conceal cables that run to lights, props or other devices. This is available in 1" increments starting at 1" and going as long as 6". The wire channel gap has a 3/8" opening and...$4.00 -
Choose Options STL FILES
STL File - X-Connect - Pigtail Numbering ClipsThese are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. We recommend that you print these in PETG. The port numbers are clearly visible which makes identifying all of your cables a breeze. They extend...$4.00 -
Choose Options SFL Designs
STL File - YPS GlideGuideYPS GlideGuide – The Mega Tree Game‑Changer Stop fighting your mega tree. Start gliding it. The YPS GlideGuide by SFL Designs, was inspired by the original Sliding Tree Topper Bearing Block from Lipich Engineering and is built to eliminate binding,...$4.00
