General

The pixel pusher is a EFL version that is very ergonomic and also includes a reverse pixel feature to help push pixels back out of coro. Other Pixel Jig Products:SFL Pixel Pushing ToolEFL Pixel Pushing ToolStandard 1mm Pixel JigHeavy Duty 1.5mm Pixel...

This is a cylindrical twist lock case for the ESPixelStick V3. It’s meant to be zip tied directly to your elements/props or attached via one of the optional mounts. The ESPixelStick slides snugly into the base. The cover has a slot for optional...

This is a flood light mount used to secure the light to underside of a homes soffit trim. Currently, these are available to be used with 4" gaped soffit. Not all soffit is made to that exact dimension, so it is best to measure the area of soffit these...

This is 90* corner used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe. These corners are printed with PETG which is UV resistant and are intended to last for many years to come. These designs were made by HolidayCoro, and we...

This is an coupler used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe. These couplers are printed with PETG which is UV resistant and are intended to last for many years to come. These designs were made by HolidayCoro, and we...

  This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it a magnetic surface. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The pixel wires will need to be...

Stop battling with icicles that get blown around on PVC pipe. This is our secure mount for handing icicles on your gutters. With this new innovative design, you no longer need to attach your icicles to pipe and then worry about securing the pipe or clip...

Stop battling with icicles that get blown around on PVC pipe. This is our soffit trim clip for handing icicles from. The clip is 14mm thick and has two holes for zip ties spaced 18mm apart. They have a forward pitch to them to counter the force pushing...

These are our P5 Panel joiners for indoor panels. Be sure you select the correct version as the mounting holes are not the same. One easy way to tell is the number of bolt holes on each panel. Typically indoor panels have 6 or eight, and outdoor panels...

The SFL J-Channel Drilling Jig is a follow up to our popular SFL PVC Drilling Jig. This new J-Channel jig is meant to make the drilling process faster, easier and more accurate than any other designs. Unlike typical J-Channel drilling jigs, there is no...

This is a base/wall mount for a Kulp K32A-B. This mount was designed to hold the K32A-B with the Beaglebone Black, but can be used to hold just the K32A-B as well. The mounting posts were designed to use a McMaster Carr Thread-Forming screw number...