This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it a magnetic surface. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The pixel wires will need to be adjusted as they will interfere with the mounting pipe. There is an anti-rotation feature in the open side of the mount that prevents the PixelPipe from rotating keeping the pixels facing outward. The Neodymium Disc Countersunk Hole Magnets can be purchased from Amazon by following this link. The magnet can be glued on or screwed on using a thread forming screw. There is a small hole in the base that is 10mm deep where a screw can be screwed in. These are printed with PETG which is UV resistant and are intended to last for many years to come.
You can order the HolidayCoro PixelPipe(tm) from their website here.
If you have a custom rotation need, please contact us before purchasing.
Base bulk pricing will be reflected in your cart and is as follows. Optional configurations are in addition to this base bulk price.
| Quantity | Per Piece Price |
| 1-24 | $0.95 |
| 25-50 | $0.90 |
| 51+ | $0.85 |
Dimensions:
Length: 53mm
Width: 32mm
Thickness: 20mm
Downloadable STL Files:
- HolidayCoro PixelPipe(tm) Magnet Mount
- HolidayCoro PixelPipe(tm) Slimline Magnet Mount