PEX Pipe Options

This is our beam mount clip. This is available for 1/2" & 3/4" PVC and EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4 inches in length. If you have access...

  No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the coro to the clip for an even stronger connection...

  This is our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back side where a zip tie can be inserted in, and then a second zip zip...

  This is our perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. These are printed in UV resistant PETG material and if you are concerned with heat in you area, we do offer these in ASA for an additional...

  These are our seed pixel pipe clips. They snap right onto PVC, EMT or PEX pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed...