Build Props, Panels & Matrices STL Files

This is our Quad Panel joiner with the Colorlight 5A-75B mounting pattern for outdoor 10 or 12 hole panels. Be sure you select the correct version as the mounting holes are not the same between the indoor and outdoor panels. One easy way to tell is the...

This is our Quad Panel joiner for the outdoor 10 or 12 hole panels. Be sure you select the correct version as the mounting holes are not the same between the indoor and outdoor panels. One easy way to tell is the number of bolt holes on each panel...

This is our Quad Panel joiner with the Raspberry Pi 3/4 mounting pattern for outdoor 10 or 12 hole panels. Be sure you select the correct version as the mounting holes are not the same between the indoor and outdoor panels. One easy way to tell is the...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart. Try Before You Buy: This option is for those of you...

Our Seed Pixel Flushy Pops are purpose‑built for 3 & 4 wire seed pixels from Your Pixel Store, along with seeds from a variety of other vendors. They’re designed to position the seed right up against the face of a standard 10mm prop, giving you...

MatrixMate — The Clean‑Build Upgrade Your Seed Pixel Matrix Deserves Meet MatrixMate, our new connectable wire‑aligning guide built specifically for seed pixel matrices. If you’re tired of fighting wire twist, inconsistent orientation, or...

Our SeedLink System is a precision‑engineered, 3D‑printed alignment system designed to keep seed pixels perfectly straight, evenly spaced, and structurally supported across any display. Each SeedLink segment features a dedicated pixel channel and...

Our SeedLink System is a precision‑engineered, 3D‑printed alignment system designed to keep seed pixels perfectly straight, evenly spaced, and structurally supported across any display. Each SeedLink segment features a dedicated pixel channel and...

Our SeedLink System is a precision‑engineered, 3D‑printed alignment system designed to keep seed pixels perfectly straight, evenly spaced, and structurally supported across any display. Each SeedLink segment features a dedicated pixel channel and...

Our SeedLink System is a precision‑engineered, 3D‑printed alignment system designed to keep seed pixels perfectly straight, evenly spaced, and structurally supported across any display. Each SeedLink segment features a dedicated pixel channel and...

This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...

This is our T‑Post Coro Mount engineered for builders who need a rigid, reliable frame for their coro props. This mount creates a solid structural backbone for yard installations, especially larger props that demand real support, not guesswork. Each...