-
Choose Options STL FILES
STL File - 3/4" EMT Pipe (Open) to Vinyl Siding BracketThis is a EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments...$4.00 -
Choose Options STL FILES
STL File - 3/4" EMT Pipe Vertical (Closed) to Vinyl Siding BracketThis is a vertical EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm...$4.00 -
Choose Options STL FILES
STL File - 3/4" EMT Pipe Vertical (Open) to Vinyl Siding BracketThis is a vertical EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm...$4.00 -
Choose Options STL File - 3/4" EMT Seed Pixel Pipe MatrixThese are our seed pixel pipe matrix clips. They snap onto 3/4" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used...$4.00 -
Choose Options STL File - 3/4" EMT Seed Pixel Pipe Matrix For 1" Seed SpacingThese are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 3/4" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire...$4.00 -
Choose Options STL File - 3/4" EMT to 3/4" EMT Pipe Matrix ClipThis is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 3/4" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3"...$4.00 -
Choose Options STL FILES
STL File - 3/4" PEX Seed Pixel Pipe MatrixThese are our seed pixel pipe matrix clips. They snap onto 3/4" PEX pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used...$4.00 -
Choose Options STL FILES
STL File - 3/4" PEX Seed Pixel Pipe Matrix For 1" Seed SpacingThese are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 3/4" PEX pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire...$4.00 -
Choose Options SFL Designs
STL File - 3/4" PVC Open Inline Pipe CouplerThe Inline Pipe Coupler is designed to create a clean, rigid, straight‑through connection between two pipes. Whether you’re building frames for coro props, structural supports, or custom display...$4.00 -
Choose Options STL FILES
STL File - 3/4" PVC Pipe (Closed) to Coro BracketA Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T$4.00 -
Choose Options STL FILES
STL File - 3/4" PVC Pipe (Closed) to Coro Bracket SlimlineA Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T$4.00 -
Choose Options STL FILES
STL File - 3/4" PVC Pipe (Closed) to Coro Bracket Ultra SlimlineA Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T$4.00
