SFL Designs

The SFL Drilling Jig is unlike any other jig. This jig is meant to make the drilling process faster, easier and more accurate than any other design. When used properly, a 10' section of pipe can be...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our...

The SFL Drilling Jig is unlike any other jig. This jig is meant to make the drilling process faster, easier and more accurate than any other design. When used properly, a 10' section of pipe can be...

This is the STL file for our 8" Seed Pixel Topper mounting base for 1/2" EMT. This mounting base can be bolted a 1/2" EMT using a stainless steel 1/4"-20 bolt that is 2.25" in length. The mounting...

This is the STL file for our 8" Seed Pixel Topper mounting base for 1/2" schedule 40 PVC. This mounting base can be bolted a 1/2" PVC using a stainless steel 1/4"-20 bolt that is 2.25" in length. The...

This is the STL file for our 8" Seed Pixel Topper mounting base for 3/4" EMT. This mounting base can be bolted a 3/4" EMT using a stainless steel 1/4"-20 bolt that is 2.25" in length. The mounting...

This is the STL file for our 8" Seed Pixel Topper mounting base for 3/4" schedule 40 PVC. This mounting base can be bolted a 3/4" PVC using a stainless steel 1/4"-20 bolt that is 2.25" in length. The...

This is the STL file for our 8" Seed Pixel Topper that holds up to 64 strings. This thick topper plate can accommodate a pipe up to 2.5" in diameter with multiple mounting bases available for...

This is our beam mount clip. This is available for 1/2" EMT pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...

This is our beam mount clip. This is available for 1/2" PEX pipe. This clip was designed to mount on a beam with standard deck screws and the ability to be rotated 90*. The clip is 15mm thick and 4...