SFL Designs

This is a 3D printed shingle clip designed to hold 1/2", 3/4" PVC or EMT. These clips will latch onto a shingle and once the pipe is inserted, they lock on even more for a firm, secure hold. If you...

This is a 3D printed pipe clip that mounts to a surface with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip. These...

This is a 3D printed pipe clip that mounts to a surface at 90* with two screws. The mounting holes are angled slightly towards the center to ensure a power drill does not damage the arms of the clip...

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 1/2" PVC pipe. This interlocking pipe also doubles as a wide base preventing your...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 1/2" PVC pipe. This interlocking pipe also doubles as a wide base preventing your...

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 1/2" PVC pipe. This interlocking pipe also doubles as a wide base preventing your...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is a flush mount pipe clip. This is available for 1" PVC pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 1" schedule 40 PVC pipe. There is also a locking pin option...

This is a PPC (Pixel Pipe Clip) that will securely hold a GumDrop pixel, (round base version) from Your Pixel Store and other vendors, perpendicular to a pipe for Christmas Lights. This was designed...