SFL Designs

The SFL Drilling Jig is unlike any other jig. This jig is meant to make the drilling process faster, easier and more accurate than any other design. When used properly, a 10' section of pipe can be...

The SFL Drilling Jig is unlike any other jig. This jig is meant to make the drilling process faster, easier and more accurate than any other design. When used properly, a 10' section of pipe can be...

The SFL Drilling Jig is unlike any other jig. This jig is meant to make the drilling process faster, easier and more accurate than any other design. When used properly, a 10' section of pipe can be...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...

This is the STL file for our Mini Tree Base Tension Hook which is used to connect the seed pixel strands from our Seed Topper to the base ring of your mini tree. There is an eyelet along the back...

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

These are our seed pixel pipe clips. They snap right onto 1/2" PEX pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but...

These are our seed pixel pipe matrix clips. They snap onto 1/2" PEX pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" PEX pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire...

This is a gutter clip designed to hold 1/2" PEX pipe. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a built in...

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 1/2" PVC pipe. This interlocking pipe also doubles as a wide base preventing your...

This is a Shutter Flush Mount clip PVC or EMT pipe along the top of a standard shutter. These are available in two mounting configurations, a flush mount and a raised angle mount.   Try Before You...