SFL Designs

This is a 3D printed Pixel Pipe Stake. There are several options available that hold PVC, EMT, and PEX. They are available in 8", 10" and 12" lengths. When installing these into the ground, it is...

This is the STL files to print the roof peak brackets designed to hold 1/2" schedule 40 PVC pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in...

These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our...

These are our seed pixel pipe clips. They snap right onto 1/2" Schedule 40 PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your...

These are our seed pixel pipe matrix clips. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to...

This is a 3D printed pipe clip to hold 1/2" schedule 40 PVC pipe that would then mount to a flat surface with two screws.Try Before You Buy:This option is for those of you that are not certain if...

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 1/2" PVC pipe. This interlocking pipe also doubles as a wide base preventing your...

This is a gutter clip designed to hold 1/2" schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You...

This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 1/2" schedule 40 PVC pipe. There is a locking pin option that...