STL Files

These are our P5 Panel joiners for indoor panels. Be sure you select the correct version as the mounting holes are not the same. One easy way to tell is the number of bolt holes on each panel. Typically indoor panels have 6 or eight, and outdoor panels...

Stop battling with icicles that get blown around on PVC pipe. This is our soffit trim clip for handing icicles from. The clip is 14mm thick and has two holes for zip ties spaced 18mm apart. They have a forward pitch to them to counter the force pushing...

This is a middle joiner used with the NON painted Puck Track Mounting system. Each joiner gives your Puck Track mounting system a professional finish. These can be 3D printed without supports.These joiners were designed to work with the Puck Track...

This is a middle joiner used with the painted Puck Track Mounting system. Each joiner gives your Puck Track mounting system a professional finish. These can be 3D printed without supports.These joiners were designed to work with the Puck Track mounting...

This is a blank end cap used with the painted Puck Track Mounting system. Each end cap gives your Puck Track mounting system a professional finish. These can be 3D printed without supports.These end caps were designed to work with the Puck Track...

This is an end cap with a threaded hole for a PG7 gland to be used with the painted Puck Track Mounting system. Each end cap gives your Puck Track mounting system a professional finish. These can be 3D printed without supports.   These end caps were...

This is an angled bracket used with the painted Puck Track Mounting system. Each corner bracket gives your Puck Track mounting system a professional finish. These WILL required tree style supports.These end caps were designed to work with the Puck Track...

This is a blank end cap used with the NON painted Puck Track Mounting system. Each end cap gives your Puck Track mounting system a professional finish. These can be 3D printed without supports.These end caps were designed to work with the Puck Track...

This is a front brace for the universal coro mounts. This is used to help distribute the load of the zip tie on the front of the coro as to not damage the coro. These have holes that are one inch apart.Try Before You Buy:This option is for those of you...

This is the STL file for our 8" Seed Pixel Topper that holds up to 64 strings. This thick topper plate can accommodate a pipe up to 2.5" in diameter with multiple mounting bases available for purchase. Our unique design allows most seeds pixels to be fed...

This is the STL file for our 8" Seed Pixel Topper mounting base for 1/2" schedule 40 PVC. This mounting base can be bolted a 1/2" PVC using a stainless steel 1/4"-20 bolt that is 2.25" in length. The mounting base is bolted to the 8" Seed Pixel Topper...

This is the STL file for our 8" Seed Pixel Topper mounting base for 1/2" EMT. This mounting base can be bolted a 1/2" EMT using a stainless steel 1/4"-20 bolt that is 2.25" in length. The mounting base is bolted to the 8" Seed Pixel Topper using...