STL Files

This is a vinyl siding corner bracket for 1/2" Schedule 40 PVC. These were designed to fit 3", 3 1/3" and 4" vinyl siding corners.Try Before You Buy:This option is for those of you that are not...

This is the STL files to print the roof peak brackets designed to hold 1/2" schedule 40 PVC pipe. These brackets will hook over your roof peak top cap and hold the pipe securely to the roof, even in...

This is a pipe clip that slides onto soffit trim. This is available for 1/2" & 3/4" PVC and EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You...

This is a shingle clip designed to hold 1/2" PVC in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5"...

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is 4mm in diameter with a 4mm countersunk hole. The clip...

This is our 1/2" PVC to 1/2" PVC perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if...

These are our seed pixel pipe matrix clips. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe (1/2" PVC) to be used as a standoff. They will space the PixelPipe far enough...

This is a gutter clip designed to hold 1/2" schedule 40 PVC. These clips will latch over the edge of the gutter and hold the pipe securely to the gutter, even in heavy winds! These new clips have a...