STL Files

This is a vertical EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm...

This is a vertical EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm...

This is an EMT to PVC bushing. This bushing was designed to work with the Lasco Schedule 40 fittings. Please note that the 3/4" bushing was designed to fit into a 3/4" Schedule 40 fitting and accept...

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T

A Coro Pipe Clip engineered to mount directly to your coro prop and create a rigid framing system using PVC or EMT conduit. T

This is a EMT pipe to vinyl siding pixel clip to mount your Coro Prop EMT frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm increments...

This is a SPPC (Square Pixel Pipe Clip) that will securely hold a 12mm Square pixel to a pipe for Christmas Lights. This was designed for 3/4" EMT pipe. There is a locking pin option that will help...

This is a flush mount pipe clip. This is available for 3/4" EMT pipe. The mounting hole is a 4mm thru bore with a 6mm diameter counter-bore hole that is 3mm deep. The clip is 15mm thick and varies in...

This is a pipe clip that slides onto soffit trim. This is available for 3/4" EMT pipe. The clip is 12mm thick and varies in length based on the pipe it is made for. Try Before You Buy: This option is...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel perpendicular to a pipe for Christmas Lights. This was designed for 3/4" EMT pipe. There is a locking pin option that will...

This is a PPC (Pixel Pipe Clip) that will securely hold a 12mm Bullet pixel parallel to a pipe for Christmas Lights. This was designed for 3/4" EMT pipe. There is also a locking pin option that will...

This is a pipe clip that mounts to a surface with a 1.25" magnet that is to be screwed into the base. These are available in lengths of 1", 1.5" 2", 2.5" & 3". The length is from the center of the...