STL Files

This is a shingle clip designed to hold 1/2" EMT in a perpendicular direction on your roof. These clips will latch onto a shingle and a pipe can then be placed on the clip and secured with a standard zip tie. These clips offer a secure grip in the top...

This is a 3D printed gutter clip designed to hold 3/4" EMT pipe. These clips will latch over the edge of the gutter and hold the pipe or pixel strip securely to the gutter, even in heavy winds! Three different sizes are included in the zip file.Try...

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side...

This is an EPMC (EMT Pipe Matrix Clip) that will connect to other EMT pipes to help create a pixel matrix. This version was designed for 1/2" EMT pipe. This is available for 1", 1.5", 2", 2.5" and 3" spacing to maintain proper side to side spacing that...

This is our 1/2" EMT pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip is 15mm thick and varies in length.Try Before You...

This is our 1/2" EMT to 1/2" EMT perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

This is our 1/2" EMT to 1/2" PVC perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

This is our 1/2" PVC to 1/2" EMT perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...

These are our seed pixel pipe matrix clips. They snap onto 1/2" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used at the start and end of a run, and two clips are used...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" EMT pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One clip is used on the top and bottom of...

This mount is used with the HolidayCoro PixelPipe(tm) Bullet Style Pixel Node Mounting Pipe to attach it to another pipe (1/2" EMT) to be used as a standoff. They will space the PixelPipe far enough away from the mounting pipe to clear the pixels. The...

This is our 1/2" EMT to 3/4" PEX perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if you need a custom configuration, please let us know...