STL Files

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 3/4" PVC pipe. This interlocking pipe also doubles as a wide base preventing your arches from falling forwards or backwards. Each base has...

These are our Ultimate Arch Bases. Each base has a sturdy base that can interlock with other arch bases by using a 3/4" PVC pipe. This interlocking pipe also doubles as a wide base preventing your arches from falling forwards or backwards. Each base has...

This is a surface mounting bracket for a quad power supply. These new brackets were designed for the MEAN WELL LRS-350 power supplies.These brackets are 5mm thick with 15mm deep and 53mm wide mounting tabs with dual holes for varying mounting options...

This is an end cap used with the Bullet Track system. Each end cap gives your Bullet Track system a professional finish. There are three variations available for these end caps, a blank end cap, an end cap with a threaded hole for a PG7 gland, and an end...

These are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. We recommend that you print these in PETG. The port numbers are clearly visible which makes identifying all of your cables a breeze. They extend...

These are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. We recommend that you print these in PETG. The port numbers are clearly visible which makes identifying all of your cables a breeze. They extend...

This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...

This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...

This is a generic coro backer plate that is used to keep slitted coro flat. There are three versions of the backer plate available, Single, Dual and Triple zip tie. Each version has a zip tie center to center spacing of two (2) inches. The dual and...

The pixel pusher is a redesigned version of what is currently out on the market. Our pixel pusher has a larger handle compared to others which allows more contact with the palm of your hand and is also more ergonomic.Try Before You Buy:This option is...

This pixel strip jig was designed to work with the standard 1mm thick pixel strip as well as the heavy duty 1.5mm pixel strip. There are four mounting holes to secure the jig to a table top. The holes are 4mm in diameter and work with standard wood...

This is an angled bracket used with the Bullet Track Mounting system. Each bracket gives your Bullet Track mounting system a professional finish. These angles have a specially designed retention hole for a pixel to be added to the corner if you desire to...