A magnetic coro mount designed for fast, tool‑free installation of coro props on metal surfaces. This mount uses a countersunk neodymium magnet to create a strong, reliable attachment point while allowing you to position or remove props instantly during setup.
Mounts are available in 10 mm length increments from 50 mm to 100 mm, measured to the base of the clip (not including magnet thickness). The round magnet base adds an additional 0.25" to the overall length once installed.
The magnet attaches to the clip using either adhesive or a mechanical fastener. A 10 mm‑deep countersunk hole in the base accepts a thread‑forming screw for a secure, permanent connection. For customers who prefer sourcing their own magnets, these mounts are designed specifically around Neodymium Disc Countersunk Hole Magnets, which can be purchased on Amazon by following this link.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG, ASA or ABS
- At least 20% infill (honeycomb or gyroid for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Diameter: Varies
Length: Varies
Thickness: 20mm
Downloadable STL Files:
Magnetic Coro Mount