STL File - SFL Pixel Strip Pushing Tool

The pixel pusher is a redesigned version of what is currently out on the market. Our pixel pusher has a larger handle compared to others which allows more contact with the palm of your hand and is also more ergonomic.

Try Before You Buy:

This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.

Terms & Conditions:

Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.

Recommended Printer Settings:

These are the minimum print settings that we recommend you use

• PETG or ABS
• At least 25% infill (grid or honeycomb for strength)
• We used a 0.4mm nozzle with a 0.2mm layer height
• At least 1mm wall thickness
  • 4 walls
  • 6 Top and Bottom layers
• These can be printed without supports, but we have had the best appearance results when using supports
• Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
  • Calibration X, Y, Z piece
  

Other Pixel Jig Products:

• SFL Pixel Pushing Tool
• EFL Pixel Pushing Tool
• Standard 1mm Pixel Jig
• Heavy Duty 1.5mm Pixel Jig

Downloadable STL Files:

• SFL Pixel Pushing Tool
• EFL Pixel Pushing Tool
• Standard 1mm & Heavy Duty 1.5mm Pixel Jig