These are multi-colored Pigtail Numbering Clips that help mark your pigtails from your controller or props. We recommend that you print these in PETG. The port numbers are clearly visible which makes identifying all of your cables a breeze. They extend out from the clip so they can be painted much easier. These snap on to the molded portion of the pigtail strong so they won't fall off during setup or tear down of your display. No zip-ties, glue or other adhesives are needed. They are available for X-Connect and Ray Wu pigtails.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG or ABS
- At least 25% infill (grid or honeycomb for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports, but we have had the best appearance results when using supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Diameter: Varies
Width: 15mm
Thickness: 13mm
Downloadable STL Files: