STL File - 20mm PVC Seed Pixel Pipe Clip

These are our seed pixel pipe clips. They snap right onto 20mm PVC pipe and allow your seed pixels to be securely mounted to your pipe. These work best with the seed pixels from Your Pixel Store, but they also work great with all other seed pixels on the market including the XL seed pixels.

Try Before You Buy:

This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.

Terms & Conditions:

Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.

Recommended Printer Settings:

These are the minimum print settings that we recommend you use

• PETG or ABS
• At least 25% infill (grid or honeycomb for strength)
• We used a 0.4mm nozzle with a 0.2mm layer height
• At least 1mm wall thickness
  • 4 walls
  • 6 Top and Bottom layers
• These can be printed without supports
• Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
  • Calibration X, Y, Z piece
  

1/2" PVC Seed Pixel Pipe Clip

3/4" PVC Seed Pixel Pipe Clip

1" PVC Seed Pixel Pipe Clip

1/2" EMT Seed Pixel Pipe Clip

3/4" EMT Seed Pixel Pipe Clip

1/2" PEX Seed Pixel Pipe Clip

3/4" PEX Seed Pixel Pipe Clip

20mm PVC Seed Pixel Pipe Clip