This is a 3D printed pipe clip to hold 3/4" schedule 40 PVC pipe that would then mount to a flat surface with two screws.
Try Before You Buy:
This option is for those of you that are not certain if this clip will work for you. Feel free to download the file for free and if it works out for you, please consider supporting us by returning and purchasing the file.
Terms & Conditions:
Please note that by downloading any STL files from our website, you agree to our Terms & Conditions of use of any downloaded files from our website.
Recommended Printer Settings:
These are the minimum print settings that we recommend you use
- PETG or ABS
- At least 25% infill (grid or honeycomb for strength)
- We used a 0.4mm nozzle with a 0.2mm layer height
- At least 1mm wall thickness
- 4 walls
- 6 Top and Bottom layers
- These can be printed without supports
- Ensure that your printer is calibrated correctly, here is a Thingiverse file that we recommend to help calibrate your printer
Dimensions:
Diameter: Varies
Length: Varies
Thickness: 15mm
Mounting Hole Center to Center: 12mm
Mounting Hole Diameter: 4mm
Downloadable STL Files:
1/2" PVC Side Wall Flush Mount
3/4" PVC Side Wall Flush Mount
1/2" EMT Side Wall Flush Mount
3/4" EMT Side Wall Flush Mount