Build Props, Panels & Matrices STL Files

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is 4mm in diameter with a 4mm countersunk hole. The clip...

This is our 1/2" PVC pipe standoff. We have included lengths of 1" up to 3" in 1/2" increments in the downloadable files. The mounting hole is for a 1/4-20 bolt with a 4mm countersunk hole. The clip...

This is a vertical PVC pipe to vinyl siding pixel clip to mount your Coro Prop PVC frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm...

This is a vertical PVC pipe to vinyl siding pixel clip to mount your Coro Prop PVC frame to your home. Each clip can reliably support up to 10lbs of weight. These are available in lengths of 10mm...

These are our Roof Prop Mounts for small to medium sized Coro or PVC props. We added holes in the base and feet to secure the PVC with screws so the pipes stay in place while out on your roof. Our...

These are our seed pixel pipe matrix clips. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to secure the wire to the clips. One...

These are our seed pixel pipe matrix clips specifically for 1" seed pixels. They snap onto 1/2" schedule 40 PVC pipe to create wrap locations for your seed pixels. You then use small zip ties to...

This is our 1/2" PVC to 1/2" EMT perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if...

This is our 1/2" PVC to 1/2" PVC perpendicular pipe mount. This is a great mount for creating a backer for props beneath arches. We have several combinations that we feel are the most popular, but if...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" schedule 40 pipe. This is available for 1", 1.5", 2", 2.5"...

This is a PPMC (PVC Pipe Matrix Clip) that will connect to other PVC pipes to help create a pixel matrix. This version was designed for 1/2" & 3/4" schedule 40 pipe. This is available for 1", 1.5",...

No more icicles flapping in the wind with this flush mount icicle pipe clip! The icicle coro is attached to the pipe of your choice and two holes are in the arm if a zip tie is used to secure the...